After time (around 5 to 6 years) your sand may need changing in the filter. This is because the grains of sand will round off making it less efficient to trap the smaller particles.
This can cause cloudy pools and cause Algae to grow .
When this happens then it is probably time to get the sand replaced. We also replace the spray bars at the bottom of the filter as they can become brittle over time and if one of them breaks then sand will be pumped into the pool.
Occasionally a selector valve will fail causing a substantial loss of water as it flows freely down the waste pipe even when the lever is in the filter position.
Signs that the valve is starting to fail are water sitting in the recesses of the lever and the pool starting to need a little more water than usual.
If this happens then call me to check before its to late and causes more costs than needed.
If your pump becomes noisy or loses it ability to pump the water efficiently then please call me. Sometimes it may just be a blocked impeller from debris slipping through the pump basket which needs unblocking.
If it is not this and the pump has a problem then depending on the severity it can be repaired. Unfortunately this can be costly and in many cases it is cheaper to purchase a new pump.
Occasionally the sand filter will need changing due to age. They can develop leaks along the seams or just start leaking at many various points. Normally a leaking filter is not repairable.
When changing the filter then it will be installed with a new selector lever as part of the installation cost. Also it is recommended to add new sand or glass system at this point.
Pool lights are available in many different styles, colours and wattages.
For more information on this or if you have a light not working or the transformer has no power, please contact me for a site visit for options available